Pro Semi-Isolastic 5006

Surface Preparation

The cement-based surfaces of structures in contact with water must be solid, dry, load-bearing, dust-free, clean, and level.
The surface must be thoroughly cleaned from any oil, grease, rust, and paraffin residues that could weaken adhesion, and should have no loose particles.
Iron and wooden wedges on the surface must be removed, active water leaks and resulting cavities must be filled with Plugging Mortar or PROEDİT 5045 Repair Mortar, and chamfers with a radius of at least 4 cm must be made on corners and edges.
The application surface must be thoroughly wetted and left until it reaches a wet/dry condition.
If the coating material loses its water immediately and takes on a dull appearance during application, it indicates that the surface is not wetted sufficiently or is drying too fast.
In such cases, when the weather is hot or materials are exposed to wind, up to 7% water relative to component B can be added into the mixed material solely for the first coat.

Application

The 5006/2K PRO İZOLASYON UV mixture is applied in two or three coats using a Thoro brush.
The direction of the brush application in each coat must be perpendicular to the previous one.
The waiting time between coats varies depending on environmental conditions.
For reinforcement with 5006/2K PRO İZOLASYON UV waterproofing mesh, the first coat is applied with a Thoro brush.
Following the drying of the first coat, the mesh is laid, and the second and third coats are applied over it.

Category: Waterproofing Systems

It is a fully flexible water insulation and concrete protection mortar that is resistant to positive and negative water pressure and has super UV resistance.

Advantages

It is elastic, does not shrink, does not crack, and is UV-resistant.
It provides secure applications in the waterproofing of terrace roofs that will not be covered under light load.
It is easily applied on horizontal and vertical surfaces with a brush, roller, trowel, or spray machine.
It provides seamless and jointless waterproofing.
It provides high-performance water impermeability.
It is water vapor permeable, allowing the concrete to breathe.
It is non-toxic and ideal for drinking water tanks.
Thanks to its flexibility and high adhesion property, it forms an excellent insulation layer under ceramic and screed.
It protects concrete surfaces from carbonation and chloride.

Areas of Use

Indoors and outdoors, in vertical and horizontal applications.
On terraces (provided the gray color application is protected on top).
White color must be used in places open to UV.
In soft water (between pH 3 and pH 7) storage pools used in the textile industry.
In water tanks and Olympic swimming pools.
In elevator pits.
In wet areas such as WC, bathrooms, kitchens, and balconies.
As part of a foundation waterproofing system, in areas sensitive to movement, vibration, and minor settlements.
In protecting concrete against water, carbonation, and de-icing salts.
Used in facilities such as thermal springs and Turkish baths.

Related products