Pro Sıvamatik 5100 Surface Preparation, Application, and Rules Guide
Surface Preparation
The surface to be applied must be completely freed from mold oil, dust, paint, and adhesion-reducing substances.
Cracks and holes must be repaired prior to application using the same material or suitable Modew Repair Mortar.
If the application surface is dry and hot, it must be moistened with water.
On surfaces like aerated concrete, priming should be done 1 day before application using Wallbond 5001, while on smooth surfaces like exposed concrete, a preliminary spatter dash (Ön Serpme Sıvası) should be applied 1 day prior.
Application is commenced after the surface dries.
Application
5100 PROSIVAMATİK is mixed with a ready-plaster machine and sprayed onto the surface using $4.5 – 5.5\text{ lt}$ of water per $25\text{ kg}$ bag.
The application thickness in a single layer should be between $1\text{ cm}$ and $2.5\text{ cm}$.
If the thickness exceeds $2.5\text{ cm}$, the second layer is applied at a maximum thickness of $2.5\text{ cm}$ after the first layer has set.
The surface is screeded (mastered).
Following this process, once the plaster has sufficiently hardened, the plaster surface is floated (triffled) and finished using a damp sponge.
Rules and Safety Instructions
S2: Keep out of reach of children.
S24/25: Avoid contact with eyes and skin.
S26: In case of contact with eyes, rinse thoroughly with water and consult a doctor.
S28: In case of contact with skin, wash immediately with plenty of water.
S29: Do not empty into drains.
S46: If swallowed, seek medical advice immediately and show the container or label.
Advantageous Features
It serves as both rough and fine plaster with a single-layer application.
It creates a solid base with high adhesion and strength resistance.
It provides the opportunity for easy and fast application with a machine.
It is more resistant to water compared to traditional plasters.
Areas of Use
It is applied to brick, aerated concrete, concrete, exposed concrete, pumice, briquette wall, and ceiling surfaces in indoor and outdoor spaces.
