gemini generated image buv7c0buv7c0buv7

Proclean 5020

Proclean 5020 Surface Preparation, Application, and Rules

Surface Preparation

  • Since the material is acidic, a test should be performed on a small area before application to check whether the coating material on the surface is resistant to acid.

  • In such cases, since the coating material will be damaged, tape is applied to the joint edges.

  • Before application, the surface must be mechanically cleaned and freed from dust.

Application

  • 5020 Pro Clean Grout Cleaner is applied without dilution.

  • After bringing the spray nozzle to the open position, the product is sprayed onto the dirty area.

  • Wait for 1-2 minutes for the material to penetrate the surface.

  • Then, the joint gaps are cleaned by pressing with the help of a suitable brush or cloth.

  • When cleaning is finished, the surface is cleaned with water and rinsed.

Rules

  • Acid-resistant plastic gloves must definitely be used.

  • While applying, work only in the joint intervals and do not spread it onto ceramic and tile surfaces.

  • Do not let it contact metals. It is not suitable for use on surfaces affected by acid such as acrylic, wood, etc.

  • When used on non-acid-resistant coating materials, polished and honed surfaces, and polished marble and granite surfaces, tape should be applied to prevent overflowing outside the joint gaps.

  • Other cleaning materials and bleaches should not be added into the product. Care must be taken to ensure that it does not mix with drinking water and groundwater.

Category:

  • Product Description: It is a ready-to-use ceramic surface and grout cleaner that has the effect of quickly cleaning dirt and construction residues on the surface of coating materials and grout fillers.

  • Advantageous Features:

    • It easily cleans residues that do not come off with normal cleaning materials thanks to its acidic content.

    • The active substances in its content are %90 recyclable.

  • Areas of Use:

    • In indoor and outdoor spaces.

    • On horizontal and vertical surfaces.

    • In grout fillers and joints of matte coating materials. Since it is acidic and abrasive, it is used by applying tape on shiny coating materials, considering that it might overflow onto the joint edges in their joint fillers and joints.