C3000 Platinum Fiberglass Reinforced

Elastomeric bitumen; petroleum bitumen modified by adding thermoplastic rubbers.

Technical Specifications:

  • Reinforcement Type: Fiberglass

  • Top Surface Coating: PE Film

  • Bottom Surface Coating: PE Film

  • Length: 10 m (TS EN 1848-1)

  • Width: 1 m (TS EN 1848-1)

  • Thickness: 3 mm (TS EN 1849-1)

  • Tensile Strength (Long / Trans): 400 / 300 N / 50 mm (TS EN 12311-1)

  • Elongation at Break (Long / Trans): 2 / 2 % (TS EN 12311-1)

  • Cold Flexibility: -10 °C (TS EN 1109)

  • Heat Resistance: >110 °C (TS EN 1110)

Product Layers:

  • Top Surface: Polyethylene Top Surface Coating

  • Upper Layer: APP Polymer Modified Bitumen

  • Core: Fiberglass

  • Lower Layer: APP Polymer Modified Bitumen

  • Bottom Surface: Polyethylene Bottom Surface Coating

Elastomeric bitumen; petroleum bitumen modified by adding thermoplastic rubbers.

  • Advantages & Features

    • Long-lasting and flexible.

    • Easily applicable to all types of surfaces.

    • High tensile and tear strength.

    • Resistant to aggressive effects that may occur in the soil.

    • Easily applied in details such as dilatation, chimney edges, and parapet turns.

  • Application Areas

    • Used under coatings for foundation waterproofing (bochlama), parking lots, terraces, pitched roofs, balconies, flowerbeds, garden terraces, concrete, channels, rain gutters, hidden gutters, retaining and basement walls, wastewater treatment plants, against pressurized groundwater, water tanks, ponds, swimming and ornamental pools, and wet areas such as kitchens, bathrooms, and WCs.