Proedit 5045

ProEdit 5045 Repair Mortar Technical, Surface Preparation, and Application Guide

Technical Specifications

• General Information: $23^{\circ}\text{C}$ and %50 Relative Humidity.

• Appearance: Gray / White colored powder.

• Shelf Life: 12 months (in unopened packaging in a dry environment).

• Application Temperature: $(+5^{\circ}\text{C})(+35^{\circ}\text{C})$.

• Mixing Ratio: $5.5 – 6.5\text{ lt}$ water / $25\text{ kg}$ powder.

• Pot Life: 3 hours.

• Slip: $\leq 0.5\text{ mm}$.

• Open Waiting Time: $\geq 0.5\text{ N/mm}^2$ after at least 20 minutes.

• Service Taking Time: 8 – 24 hours.

• Consumption (Double-Sided): Average $4\text{ kg/m}^2$.

Surface Preparation

• The surface must be dry, clean, sound, and free of dust; oil, dirt, or anti-adhesive materials must be removed, and substances like mortar and cement residues must be scraped off.

• Following surface cleaning, the surface should be primed with a single coat of MODEW primer and left to dry for 1–2 hours to increase bonding strength and balance surface absorbency.

• Exposed concrete surfaces must be primed with a single coat of Wallbond 5001 exposed concrete primer and left to dry for a minimum of 3 hours before application to increase bonding strength.

Application

• PROEDİT 5045 must be applied in equal thickness to all surfaces to be repaired or leveled using a steel trowel.

• After application, the surface should be troweled with a damp sponge.

• If a two-coat application is to be performed, 2–3 hours should be waited between coats, and the first coat must be moistened during the second coat application.