Wallbond 5001

Wallbond 5001 Gross Concrete Primer Technical Specifications and Application Guide

Technical Specifications

• General Information: $23\text{ }^\circ\text{C}$ and %50 Relative Humidity

• Appearance: Orange Liquid

• Shelf Life: 12 months (in unopened packaging in a dry environment)

• Application Temperature: $(+5\text{ }^\circ\text{C}) – (+35\text{ }^\circ\text{C})$

• Mixing Ratio: 3-4 lt water / 12 kg liquid

• Pot Life: 1 hour

• Slip: $\le 0.5\text{ mm}$

• Open Waiting Time: At least 30 min. later $\ge 0,5\text{ N/mm}^2$

• Waiting Period After Application: 48 hours

• Water Absorption: 30 min. / 4 hours $\le 5\text{ gr} / \le 10\text{ gr}$

Surface Preparation

• Care must be taken to ensure that the surface is cured and sound.

• The surface must be freed from residues that would prevent adhesion (oil, dirt, detergent, soap, etc.).

• If necessary, the surface should be smoothed with modew Repair Mortars, and cracks must be repaired.

Application

• Wallbond 5001 Gross Concrete Primer is added into a plastic bucket with %25 water, mixed thoroughly, and applied with a brush or roller.

• It is recommended that the mixing be performed with a mixer having a low speed of less than 500 rpm.

• The drying time is 45-60 minutes, and application should not be carried out on top of it before it dries.

• The temperature of the surface to be applied must be a minimum of $5\text{ }^\circ\text{C} – 30\text{ }^\circ\text{C}$, and the surface must not receive rain.

• After the applied Wallbond 5001 Gross Concrete Primer dries, plaster application should be transitioned to at least 24 hours later.

• Hands and application tools should be washed with plenty of water after application.

• Refer to the Safety Data Sheet for information.

• The specified consumption amount is for general information purposes and may vary depending on application conditions and surface properties.