Pro Semi Isolastic 5006

Pro Semi Isolastic 5006 Surface Preparation and Application Guide

Surface Preparation

Ensure that the cement-based surfaces of structures in contact with water are sound, dry, load-bearing, dust-free, clean, and also level.
The surface must be thoroughly cleaned from any oil, grease, rust, and paraffin residues that would weaken adhesion, and there should be no loose particles on the surface.
Iron and wooden wedges on the surface should be removed, active water leaks and resulting cavities should be filled with Tıkaç Harcı or PROEDİT 5045 Repair Mortar, and a chamfer with a radius of at least $4\text{ cm}$ should be made on corners and edges.
The application surface should be thoroughly wetted and waited until it reaches a wet/dry state.
If the coating material loses its water immediately during application and takes on a matte appearance, it means the surface is not wetted sufficiently or is drying too fast.
In such cases where the weather is hot or materials are exposed to wind, water up to %70 of component B can be added into the mixed material only for the first coat.

Application

The 5006/2K PRO İZOLASYON UV mixture is applied in two or three coats with the help of a Thoro brush.
The brush application direction in each coat must be perpendicular to each other, and the waiting time between coats varies depending on environmental conditions.
For reinforcement with 5006/2K PRO İZOLASYON UV waterproofing mesh, the first coat is applied with a Thoro brush, the mesh is laid after it dries, and the second and third coats are applied over it.

It is a positive and negative water pressure resistant, UV super-resistant fully flexible waterproofing and concrete protection mortar.

Advantageous Features

It is elastic, does not shrink, does not crack, and is UV resistant.
It provides safe applications in the waterproofing of terrace roofs that will not be coated over under light traffic.
It is easily applied on horizontal and vertical surfaces with a brush, roller, trowel, or spray machine.
It provides seamless and jointless waterproofing.
It provides high-performance water impermeability.
It is water vapor permeable, allowing the concrete to breathe.
It is non-toxic and ideal for drinking water tanks.
Thanks to its flexibility and high adhesion property, it creates an excellent insulation layer under ceramic and screed.
It protects concrete surfaces from carbonation and chloride.

Areas of Use

Used in indoor and outdoor spaces, in vertical and horizontal applications.
Used on terraces (provided that the surface is protected in gray color applications).
White color must be used in places open to UV.
Used in soft water (between pH 3 and pH 7) storage pools used in the textile industry.
Used in water tanks and Olympic swimming pools.
Used in elevator pits.
Used in wet areas such as toilets, bathrooms, kitchens, and balconies.
Used in areas sensitive to movement, vibration, and slight settlements as part of a foundation waterproofing system.
Used in protecting concrete from water, carbonation, and de-icing salts.
Used in facilities such as thermal springs and Turkish baths.

Related products