Proizolastik 5006

Proizolastik 5006 Surface Preparation and Application Guide

Surface Preparation

Ensure that the cement-based surfaces of structures in contact with water are sound, dry, load-bearing, dust-free, clean, and level.
Thoroughly clean the surface of any oil, grease, rust, and paraffin residues that could weaken adhesion, and ensure there are no loose particles.
Remove iron and wooden wedges from the surface, fill any active water leaks and resulting cavities with Tıkaç Harcı or PROEDİT 5045 Repair Mortar, and create a chamfer with a radius of at least $4\text{ cm}$ on corners and edges.
Wet the application surface thoroughly and wait until it reaches a saturated surface-dry (wet/dry) state.
If the coating material loses its water immediately and takes on a matte appearance during application, it indicates that the surface is insufficiently wetted or drying too quickly.
In hot weather or windy conditions, water up to %70 of component B can be added into the mixed material exclusively for the first coat.

Application

Apply the mixture in two or three coats using a Thoro brush, ensuring the brush direction in each coat is perpendicular to the previous one.
Note that the waiting time between coats varies depending on ambient conditions.
When reinforcing with a waterproofing mesh, apply the first coat with a Thoro brush, lay the mesh after it dries, and then apply the second and third coats over it.

It is a positive and negative water pressure resistant, UV super-resistant fully flexible waterproofing and concrete protection mortar.

Advantageous Features

It is elastic, does not shrink, does not crack, and is UV resistant.
It provides safe applications in the waterproofing of terrace roofs that will not be coated over under light traffic.
It is easily applied on horizontal and vertical surfaces with a brush, roller, trowel, or spray machine.
It provides seamless and jointless waterproofing.
It provides high-performance water impermeability.
It is water vapor permeable, allowing the concrete to breathe.
It is non-toxic and ideal for drinking water tanks.
Thanks to its flexibility and high adhesion property, it creates an excellent insulation layer under ceramic and screed.
It protects concrete surfaces from carbonation and chloride.

Areas of Use

Used in indoor and outdoor spaces, in vertical and horizontal applications.
Used on terraces (provided that the surface is protected in gray color applications).
White color must be used in places open to UV.
Used in soft water (between pH 3 and pH 7) storage pools used in the textile industry.
Used in water tanks and Olympic swimming pools.
Used in elevator pits.
Used in wet areas such as toilets, bathrooms, kitchens, and balconies.
Used in areas sensitive to movement, vibration, and slight settlements as part of a foundation waterproofing system.
Used in protecting concrete from water, carbonation, and de-icing salts.
Used in facilities such as thermal springs and Turkish baths.

Related products